Innovative and multi-functional

The Fieldmeter FM10 is an innovative new development that combines wide function diversity with an easy and intuitive operation on the basis of a powerful microcontroller technique.

Product highlights are the isotropic magnetic field strength measurement and the frequency range up to 400 kHz with a resolution of 1 nT and 0.1 V/m without the need of switching the measurement range.

Moreover, the Fieldmeter FM10L/LS supplies an integrated data logger with 1 GByte data storage and different storage modes.

Multiple measurement functions

Due to different measurement probes, the Fieldmeter FM10 is highly talented for electromagnetic fields.

The FM10 multi-purpose measurement probe supports a fast omni directional measurement of the magnetic fields. In addition the probe BS13 for measurement of isotropic magnetic fields is available.

For electric fields different measurement probes are available:

• potential-related with the FM10 multi-purpose probe
• potential-free with the electric field probe EPL (one-dimensional) or EPL 3 (isotropic)
• measurement of the capacitive coupling
• probe ES10 for the measurement of electrostatic fields

Wide frequency range

In dependence of the measurement probe a frequency range from 10 Hz up to 400 kHz is available.

With the integrated filter functions band pass 16.6 Hz, high pass 50 Hz and 2 kHz single frequency ranges can be selectively measured.

High resolution without switching

The Fieldmeter FM10 provides a measurement dynamic of 20,000 nT and/or 0.1 V/m in merely one measurement range each. Annoying switching between ranges or auto-ranging functions are a thing of the past.

Multi-functional display

On the rich in contrast and illuminated display the electric and magnetic field strength are indicated parallel, using a fast sample rate of 0.25 seconds.

Moreover, the X, Y and Z-parts of the magnetic field strength are displayable as seperated single values.
Display of measurement value plus filter and logger functions
Single vectors of the magnetic fields are displayable
Peak-hold function
Capacitive coupling

All device controls and the configuration of the data logger can be adjusted in the comfortable selection menu.

Display of recorded data sets
Comfortable selection menu

Function display during PC-connection.
Transferring data sets

As an acoustic display the sound generator produces a signal proportional to the field strength.

Diverse functions

The Fieldmeter FM10 delivers some extra functions: an acoustic alarm is activated as soon as the adjustable limit values are exceeded. The peak-hold function displays even shortest peak values of the field strength. Auto-power-off prevents the battery from discharging. Optionally, four alternating voltage outputs are available.

Powerful data logger

The data logger of the Fieldmeter FM10L/LS has a 1 GByte storage capacity and a real-time clock for an accurate time and date assignment to each measured value. The sample rate is adjustable between 0.25 seconds and 1 minute.

The logger provides two operation modes: for long-term measurement the continuous mode, for spatial recording the single spot mode.

In addition, a parallel recording of the frequency ranges band pass 16.6 Hz und high pass is possible.

The transfer of the measured values and a clear setting of the FM10 functions are done via PC using a fast USB-interface. The functional software FM-Data serves to edit and document the measured values.

Managing measured data with FM-Data

The scope of delivery of the field meter with data logger FM10L/LS contains the program FM-Data. This program is constantly developed to adapt the needs of our customers. This service is available to you in the form of free of charge updates at any time!

Since FM-Data version 2.1.2.0 and firmware version 1.31 the 9-point measurement for sleeping areas is integrated.

The FM-Data enables the user to display the device settings of the Fieldmeter FM10L/LS, adjust setting like measurement interval or limits and transfer the new setup to the FM10L/LS.

FM-Data provides a clear management of the data storage of the Fieldmeter FM10L/LS. The stored data sets are displayed and can be loaded or deleted.

The data set window shows some information like the start and the end of the record, the sample interval and filter functions, as well as the minimum and maximum values plus the 95th percentlile. With the help of the mouse the measurement value and the time stamp of each sample can be called up in the diagram.

Important occurrences in the record can be displayed enhanced in the diagram by performing a zoom.

Dialogue windows enable the user to make own comments on the respective data set and to each measured point regarding a single point record. The edited data sets can be printed as a measurement protocol or as a diagram.

Moreover, an export function to include the readings in other applications such as chart and database programs is supported.

Additionally, the storage of the measurement diagrams as a graphic data is possible.

Current firmware version 1.32

New functions

• Enhanced display of magnetostatics with positive and negative divergence
• New bar graph display shows the anomaly level
• 9-point measurement
• Display statistic values of data sets

detailed description of the changes in the current firmware version (pdf, only german)

For an update please send the Fieldmeter FM10 to Fauser Elektrotechnik.

The update is for free the first year after purchasing or when ordering a new probe - excluded shipping costs.

Otherwise a firmware update costs € 28.56 (plus shipping).