P 1205: 20 MHz/2 CH digital storage oscilloscope/DMM
- USB interface
- socket for USB-stick to save data portable
- FFT frequency analysis
- support alternative trigger
- advantage video trigger function and optimize trigger sensitivity
- record length: 6K
- true RMS multimeter
- dual independent galvanic separated (for multimeter and between oscilloscope and multimeter)
- auto scale and auto setup function in oscilloscope mode
- 5 V 1 kHz output for adjusting the measurement probes
- safety: EN 61010-1; CAT II 400 V
Technical data
Bandwidth
20 MHz
Sample rate
100 MSa/s each channel
Channels
2 CH
Display
9.7 cm (3.8") TFT 65535 colours
Resolution
640 x 480 pixel
Input
input coupling: DC, AC, GND
inpuz impedance: 1 MΩ ± 2 % parallel 10 pF ± 5 pF / 400 V DC oder ACss
Vertical
vertical sensitivity: 8 Bit (2 channels simultaneously)
max. input voltage: 400 V DC or ACss
DC accuracy: ± 5 %
rising time: < 17.5 ns
Horizontal
time base range: 5 ns/div ~ 100 s/div
sampling range: 10 S/s ~ 100 MS/s
accuracy: 100 ppm
Trigger
trigger type: Edge, Video, Alternate
trigger mode (edge): Auto, Norm, Single
trigger sensitivity: DC, AC, LF-REJ, HF-REJ
automatic measurement: peak-peak, cycle RMS, Vmax, Vmin, Vtop, Vbase, Vamp, overshoot, preshoot, rise time, fall time, +width, -width, +duty, -duty, delay A-B (rising), delay A-B (falling), frequency, period mean
storage length: 6000 points/CH
waveform storage: 4 waveforms, 4 settings
math. functions: +, -, *, /, FFT
FFT function: available
interface: USB device 2.0, USB host 1.1
Digital multimeter
DC voltage: 400 mV/4/40/400 V; ± 1 % + 1 dgt.
AC voltage: 4/40/400 V; ± 1 % + 3 dgt.; 40 - 400 Hz
DC current: 40/400 mA/10 A; ± 1.5 % + 1 dgt.
AC current: 40/400 mA/10 A; ± 1.5 % + 3 dgt.; 40 - 400 Hz
resistance: 400 Ω/4/40/400 kΩ/4/40 M&Omega ± 1 % + 1 dgt.
capacitance: 51.2 nF ~ 100 µF; ± 3 % + 3 dgt.
operation voltage: 7.4 V/3500 mA DC Li-Ion battery or AC adaptor 110/240 V AC; 50/60 Hz, 8.5 V DC/1,5 A
Subject to technical alterations.
Scope of delivery
P 1205: 20 MHz/2 CH digital storage oscilloscope/DMM; Art.-Nr.: 625
AC-DC adaptor, 2 pcs oscilloscope probes, testleads, extension module for small capacitance measurement, cable for connection to USB mass storage, USB interface cable, software-CD for Windows 2000/XP/VISTA and 7, carrying case and manual
For further information and ordering please visit the
desktop version.